![\"\"](\"https:\/\/wp.icmm.csic.es\/nanocarma\/wp-content\/uploads\/sites\/38\/2023\/11\/featured.jpeg\")
<\/p>\n<\/p>\n
In this work we present a route for fabricating WTe2<\/SUB> thin-films together with femtosecond laser post processing, enabling to finely control the conductivity. First, we produce amorphous films of WO3<\/SUB> on Si by spin-coating a sol-gel precursor followed by a consolidating annealing and a reduction process in partial H2 atmosphere, leading to porous metallic tungsten cluster layers. To achieve WTe2<\/SUB>, the films were exposed to the chalcogen vapours by isothermal closed space vapor transport. The formation of a tungsten ditelluride film composed of piled crystals could be confirmed and a gradient of surface rich Te identified through hard X-ray photoelectron spectroscopy. Finally, it is demonstrated that resistivity can be changed from 0.2 m\u03a9.m to 1 m\u03a9.m, while keeping the material characteristics. An anisotropic conductivity can be induced by direct selective thinning with fs laser writing (350 fs pulse duration, 515 nm laser wavelength) of 1D stripes. The obtained results, demonstrate that laser processing is a promising thin-film post-processing technique that can be applied to 2D transition metal dichalcogenide thin films.<\/p>\n A. Fern\u00e1ndez Garc\u00eda, M. Garcia-Lechuga, F. Agull\u00f3-Rueda, J. Rubio Zuazo, and M. Manso Silvan, \u00abFemtosecond laser thinning for resistivity control of tungsten ditelluride thin-films synthesized from sol-gel deposited tungsten oxide,\u00bb Surf. Interfaces 44<\/strong>, 103668 (2024)<\/a>.<\/p>\n","protected":false},"excerpt":{"rendered":" In this work we present a route for fabricating WTe2 thin-films together with femtosecond laser post processing, enabling to finely control the conductivity. First, we produce amorphous films of WO3 on Si by spin-coating a sol-gel precursor followed by a … Sigue leyendo